GENERAL HOLDING / MEAL DISTRIBUTION

In addition to the world renown brands represented by Capdan, such as Aladdin Temprite and Cambro, we are able to manufacture various forms of hot holding and distribution equipment.

Various trolley types are available on request i.e. decanting trolleys, meat troughs, tray clearing trolleys and more.....

Should you have any special design requirements, please contact us to see how we are able to assist.

GENERAL HOLDING / MEAL DISTRIBUTION

DESCRIPTION:

bain-marie-with-hot-closetThe Bain Marie top is manufactured from grade 304 stainless steel 1.6mm thick.  The well is manufactured from grade 304 stainless steel 1.2mm thick, the well is fitted with immersion heating elements which are thermostatically controlled from 0 to 110°C.  A half inch ball valve is fitted to the bottom of the well for drainage purposes.  The top of the Bain Marie overhangs the hot cupboard by 30mm in the front and 12mm on the sides and rear of the unit.  The turndown is 45mm on all sides.

The hot cupboard body is of monocoque construction, with the outer and inner panels manufactured from 0.9mm thick brushed stainless steel, the body is insulated with 40mm thick fibre wool.  The base and mid shelf is manufactured from 1.2mm thick brushed stainless steel.

The inner and outer doors are manufactured from grade 430 stainless steel 0.9mm thick and have 20mm thick fibre wool insulation.  The doors are top hung with nylon guides and hungers on aluminium track.

The heating of the hot cupboard is with an incalloy element fixed to the middle shelf, it is controlled thermostatically ranging from 0 to 120°C.

Two removable control panels house the electrical switch gear and indicator lights, one panel runs the full length of the unit above the doors and the second is situated to the right hand side.

The Bain Marie is to accommodate various configurations of gastronorm pans.  Excludes pans.

SIZE OPTIONS:

Stainless steel 3 division Bain Marie with insulated hot closet.

The unit measures 1150 x 750 x 910mm(h), with an electrical loading of 4.5kW, 380Volt, 2 Phase

Stainless steel 5 division Bain Marie with insulated hot closet.

The unit measures 1850 x 750 x 910mm(h), with an electrical loading of 6kW, 380Volt, 2 Phase

OPTIONAL EXTRAS:

Exterior Panels

Tubular Tray Slide

Riser shelf with an option of single/double or heated/neutral

Combination riser shelf and sneeze guard

Gastronorm pans and lids

Capping strips

Water faucet

HOLDING & SERVING TROLLEY FOR NEW GENERATION CORRECTIONAL SERVICES INSTALLATIONS
0008_CS120 TROLLEYSPECIFICATION NO. DPW1150

Each trolley shall accommodate 3 Gastronorm pans 1/1 size with lids, up to 150mm deep on the top shelf of the trolley cabinet. Three additional GN pans and lids of 150mm depth shall be accommodated below the top row of the GN pans. Food will be loaded directly into these Gastronorm containers in the kitchen and food will be served directly from trolley at designated servery points in each module block. It is therefore essential that the trolley is able to effectively maintain the food, when the trolley is plugged in, at over 65 degrees temperature without drying the product out. The trolley is NOT designed to heat-up cold food and it is advisable for these trolleys to be pre-heated prior to loading. A detailed operator’s manual must be provided by the supplier.

Construction shall be heavy-duty. Heating of the trolley is via “blanket-type” heating elements which are mounted on the base and sides of the trolley. These are low-wattage silicon rubber elements (supplied with an extended guarantee) which are permanent, but easily replaceable if necessary. Size of each element is 500 x 195mm and each trolley has five such elements. Removable
elements (for practical purposes of washing the trolley) will not be accepted.

CAPACITY:
Total capacity of 120 litres or 6 x GN1/1 Pans of 150mm depth each. These 6 pans, each with a lid, and one bread container are to be supplied with each trolley.

DIMENSIONS:
Approximately 1300 x 720 x 930mm(h), so as to suite access through standard doorways.

TECHNICAL DATA: 220V, 1 Phase, 0,75Kw.

bulk-trolleyModel BFT150 (Insulated)

Model BFT150E (Electric)

The trolley is available in electric and non-electric versions and has overall dimensions of 700mm. wide x 880mm. deep x 910mm. high and a capacity of 150litres.

It is constructed from type 304 stainless steel and has a fully insulated body.

The trolley includes a drain facility with valve and is mounted on 4 x 160mm. dia. heavy-duty castors, of which two are fixed and two swivel.

The unit includes a push-handle and rubber bumpers mounted on both front corners.

The trolley is supplied with 1x stainless steel full lid.

The electric version has an electric loading of 1,2Kw. 220V. single phase.

Also available in a 265 litre capacity

chace-trolleyModel MHSC - Heated Trolley

The trolley has overall dimensions of 700mm. wide x 880mm. deep x 910mm. high  and a capacity of 14 x  1/1 or 7 x 2/1 Gn. inserts 55mm. deep .

It is constructed from type 304 stainless steel and has a fully insulated body.

The trolley is mounted on 4 x 160mm. dia. heavy-duty castors, of which two are fixed and two swivel.

The unit includes a stainless steel drip-tray and is fitted with a cord-wrap and a holder for two x 1/1Gn. lids.

The unit includes a push-handle and rubber bumpers mounted on both front corners.

The trolley is supplied with two 1/1 Gn. stainless steel lids.

The electric  loading is 2Kw. 220V. single phase C.

Capacity :  14 x 55mm. deep Gn inserts or 8 x 100mm. deep Gn inserts

Should easily cater for up to 100 people

PASS THRU HOT HOLDING CABINET

pass-thrusDESCRIPTION:

The DHC048 has 6 removable chromium-plated grids or shelves.  Each grid is loose mounted on two side channel runners.  Please note that the electric plug will always be mounted on the same side as the door handles, although the cabinet can be customized to suite.  The cabinet will be manufactured from type 304 stainless steel inner.  It is a pass-thru cabinet with a glass door on the loading side and a similar door on the dispatch side.  The door on the loading side (side with controls) will be right-hand hinged and opening to the right while the door on the dispatch side will be left-hand hinged and opening to the left, although this arrangement can be changed on application.  Both these doors will each include a robust, positive closing, magnetized door closure and heavy-duty hinges.  Heat will be provided by 7 special rubber silicone elements mounted on the sides and base of the cabinet and temperature is controlled by a pre-set thermostat mounted on loading side of the DHS048.  The pre-set thermostat can be manually adjusted by removing the top cover plate.  No rubber bumpers will be required on the corners of the cabinet.  Heat-up time, from ambient to the required temperature is approximately 45 mins.

Units are easily stackable for those high volume outlets.

CONTROLS:

Controls include a heavy-duty on/off switch which controls power to the entire cabinet.  All these controls are mounted on the loading side but can be changed to suite the customers requirements.

CAPACITY:

+/- 48 standard pizza boxes  

TECHNICAL DATA:

Electric loading is 1 Phase, 1.05kW.  A kettle type socket is mounted on the side of the cabinet which accommodates a15 amp 220V plug with a 1.5 metre cable.

Dimensions per cabinet - Approx. 950mm H  x  830mm W  x  780mm D

OPTIONAL EXTRAS:

Mobile dolley, this consists of a 40 x 40 x  3mm stainless steel angle frame and 125mm castors, 2 swivel and 2 with brakes.

A stainless steel stand

 

TOP